Archive

Monthly Archives: April 2016

Sometimes, Tile Doctor customers will have more than one tiled area in need of professional maintenance. At this house in Wandsworth, South London; I was commissioned to clean and seal firstly a Limestone tiled kitchen floor, and a Limestone tiled shower unit. Cleaning and Sealing a Limestone Kitchen Floor I started with the Limestone tiled kitchen floor which, like many other stone floors had not been treated to the correct regular care and had become dull and dirty over time as a result.

Read more…

Advertisements

Sometimes, Tile Doctor customers will have more than one tiled area in need of professional maintenance. At this house in Wandsworth, South London; I was commissioned to clean and seal firstly a Limestone tiled kitchen floor, and a Limestone tiled shower unit.

Limestone Floor Before Cleaning Wandsworth

Cleaning and Sealing a Limestone Kitchen Floor

I started with the Limestone tiled kitchen floor which, like many other stone floors had not been treated to the correct regular care and had become dull and dirty over time as a result.

My first task involved applying Tile Doctor Remove & Go stripper in order to break down any old surface sealant and dirt. Then, I began the burnishing process, which essentially involves polishing with pads of varying grit. I started with a Medium 800 grit burnishing pad to provide an initial polish and grind away ingrained dirt, before refining this with a Fine 1500 grit pad to achieve a smooth surface. The burnishing pads are used in combination with a small amount of water.

Limestone Floor During Cleaning Wandsworth

After leaving the floor to dry for 24 hours, I sealed the tiles with Tile Doctor Colour Grow. This will provide durable surface protection for the future and also further accentuate the great natural shades in the Limestone. To add the finishing touches, I buffed the floor with a soft white buffing pad.

Limestone Floor After Burnishing Wandsworth

Cleaning and Sealing a Limestone Tiled Shower Unit

During the time it took for the Limestone tiled kitchen floor to dry, I set my sights on tackling the shower unit. The unit was suffering from a terrible amount of limescale, which would need to be removed using a set of hand held burnishing pads. Limescale deposits build up on surfaces which come into contact with hard water, and can become very unsightly if not dealt with promptly.

Limestone Shower Tiles Before Cleaning Wandsworth

This proved to be a more awkward job thanks to the intricate Limestone fittings on the shower walls. I used the smaller 6-inch burnishing pads fitted to a hand buffer, while for the kitchen floor I naturally used the larger sized pads attached to a heavy weight buffing machine.

With the limescale as bad as it was, I started to grind it off with a Very Coarse 120 grit burnishing pad, before working my way up gradually through the system of pads – each time using a slightly finer grit pad until I finished with the Ultra Fine 3000 grit pad and the surface finish had been restored.

Limestone Shower Tiles After Cleaning Wandsworth

Following this, I removed the silicone sealant around the shower fittings, and dealt with the mould growing behind it.

On the second day of work, I sealed both the kitchen floor and the shower unit. Much like the kitchen floor, the shower unit was sealed using Colour Grow to ensure long lasting protection, and fresh silicon was also fitted.

Two days of work and two rejuvenated Limestone features later, I was left with a very happy customer.

Limestone Shower Tiles Before and After Cleaning Wandsworth
 
 
Source: Limestone Tile and Stone Cleaning and Maintenance Service in Surrey

This beautiful Grey Limestone tiled floor in the small village of Barton had been installed by a tile company but had not been treated in any way. The customer had been told by the tile shop that the stone in question would have to be sealed. After doing her own research and finding us at Tile Doctor I went to see what could be achieved. Polishing a Limestone tiled floor As the floor was new I was able to get straight into polishing the Limestone with a set of four diamond encrusted

Read more…

This beautiful Grey Limestone tiled floor in the small village of Barton had been installed by a tile company but had not been treated in any way. The customer had been told by the tile shop that the stone in question would have to be sealed. After doing her own research and finding us at Tile Doctor I went to see what could be achieved.

Grey Limestone Floor Before Cleaning Barton

Polishing a Limestone tiled floor

As the floor was new I was able to get straight into polishing the Limestone with a set of four diamond encrusted Burnishing pads fitted to a rotary floor machine. I started with a course burnishing pad lubricated with a little water and then this was followed by the medium, fine and very fine pads to achieve the desired effect giving the floor a quick rinse in-between each pad.

Grey Limestone Floor During Cleaning Barton

As you can see from the photographs going over the full floor with each pad I managed to achieve a great polish on the floor and it was soon ready to be sealed.

Grey Limestone Floor After Cleaning Barton

Sealing a Limestone tiled floor

After polishing, the only task remaining was to provide the floor with a durable seal that would protect the Limestone from staining. I did this by applying a couple of coats of Tile Doctor Ultra Seal, which is a premium, natural-look penetrating sealer that is specially designed to provide maximum stain protection from within.

Grey Limestone Floor After Cleaning Barton
 
 
Source: Limestone Tile and Stone Cleaning and Sealing Service in Yorkshire

In order to properly install laminate on concrete, a moisture barrier should be used underneath. Many people wonder why they have to install a moisture barrier under the laminate and if it’s really necessary. Here are the basics of why you need a moisture barrier under laminate floor.

Moisture Issues

Concrete slabs are notorious for allowing moisture to come up through them. There is a certain amount of moisture that can make its way through concrete when the ground is saturated. After a heavy rain, concrete will soak up some of the moisture around it. This moisture can then be released into the laminate if there is no moisture barrier present.

What Can Happen

While laminate is not really a wood floor, there is some wood in the core. The laminate core is made out of pressed together wood. If water touches the core of the laminate, it will swell up drastically in some cases. Therefore, if you allow water to come up through the floor and get in the laminate, it will start to buckle and warp. This can cause the joints to be damaged permanently if you don’t dry out the floor in time. Therefore, having a moisture barrier will do a lot towards protecting your flooring investment.
 
 
Source: www.DoItYourself.com